Wharfedale Pro DVP-X215 Passive Full Range Speaker

ROAD-READY LOUDSPEAKERS SPECIFICALLY DESIGNED FOR HARDWORKING PERFORMERS

DVP X215 is tough.

The cabinets are protected by proprietary enhanced Rhino Rock paint which means these loudspeakers will look as good as new even after many successful tours, parties and events.

Special attention has been paid to the port and port mouth to ensure a huge bass output with detail and minimised distortion.

 

Key Features

  • 700W RMS / 1400W Programme / 2800W Peak
  • 135dB Max SPL
  • 40Hz – 20kHz frequency response
  • Proprietary enhanced Rhino Rock paint for a chip resistant finish
  • Parallel port mouth design creates reflective boundary, maximising low end punch.
  • Extended-range IRIS X Titanium dome compression driver
  • High powered LF driver using a double-roll surround
  • Fine-tuned crossovers, built in house for audio signal purity and optimised tuning
  • HF limiters are installed for thermal protection against extreme power input

    Description
    DOUBLE ROLL SURROUND & DRIVER TECHNOLOGY
    DVP X12 loudspeakers use the latest in Wharfedale Pro driver technology: For the LF driver, engineers have incorporated a curvilinear, double-roll surround for smooth mid-high transitions and stability for low through to mid range frequencies. Combined with 2.5” voice coils for improved thermal dissipation, you can expect consistent delivery at the highest of volumes throughout a performance. The 44mm IRIS X Diaphragm HF compression driver used on the X12 is equally robust in design – using a solid aluminum rear plate, the HF driver is strengthened for durability and heat is dissipated efficiently during prolonged time periods. Wharfedale Pro engineers have also selected a 90° x 60° elliptical waveguide optimised for wide coverage in multiple venues while touring.

     

    ACOUSTICALLY MATCHED CABINET
    The cabinet of the DVP X12 has been developed to work in perfect harmony with the advanced drive units within. Special attention has been paid to the acoustic properties of the port and port mouth to ensure a huge bass output with detail and minimised distortion. DVP X12 is coated in the latest generation chip-resistant, Rhino Rock paint.

     

    FINE-TUNED CROSSOVER
    The crossovers ensure perfect integration between the drive units and acoustic properties of the cabinet. Electronic components are carefully selected, while over-complex networks have been avoided to maintain a pure and strong audio signal. Engineers have fine tuned the crossover points for vocal intelligibility and tuned the high frequencies for long-throw to ensure clear coverage right to the back of your venue.

    IRIS X COMPRESSION DRIVER

    The coil size and electrical sensitivity of a loudspeaker transducer is critical to its performance.  DVP-X loudspeakers now include our proprietary IRIS X design which delivers Increased coil Radius and Increased electrical Sensitivity.  The radius of the coil ensures smooth heat dissipation during prolonged high volume use, while the increased electrical sensitivity ensures that the transducer converts as much electrical power into sound output as the laws of physics allow.

    A hot transducer wastes energy, risks damage and distorts.  IRIS X reduces this through improved heat dissipation and improved efficiency.

    In real-world terms, IRIS X transducers deliver higher SPL with less distortion.  They lead the market with specifications and are designed and built entirely within Wharfedale Pro.

    Increased Radius Increased Sensitivity

     

    SPECIFICATIONS

    Model Name DVP X215
    System Type Passive
    Configuration Two-way
    Frequency Response (+/- 3dB) 45-18kHz
    Frequency Range (-10dB) 40-20kHz
    Sensitivity (2.83v/1m) 101dB
    System Rated Impedance
    Calculated Maximum SPL @1m 135dB
    Low Frequency Transducer
    Size 2 x 381mm / 15″
    Voice coil size 65mm / 2.5”
    Rated impedance
    LF Power (re:AES-2012) 700w
    HF Transducer
    HF Driver Type IRIS X compression driver
    Voice Coil Size 44mm / 1.75″
    Exit Size 25mm / 1″
    Diaphragm Material Titanium
    Rated Impedance
    HF Power (re:AES2-2012) 40w
    Nominal Coverage (H x V) 90°x60°
    Nominal Impedance
    Power
    System Continuous Power 700w
    System Programme Power 1400w
    System Peak Power 2800w
    Crossover Frequency 2.2kHz
    Hardware
    2 x NL4 (speakON compatible) + 1/4″ Jack combo
    2 carry handles
    Enclosure
    Enclosure Material and finish MDF / Highest grade Rhino Rock
    Colour Options Black paint
    Grille Material & Finish Steel
    Dimensions – Unpacked
    Height 1058mm / 41.7″
    Width Front 444.5mm / 17.5″
    Width Rear 245.3mm / 9.7″
    Depth 429.0mm / 16.9″
    Dimensions – Packed
    Height 1125mm / 44.3″
    Width Front 520mm / 20.5″
    Width Rear 290mm / 11.4″
    Depth 290mm / 11.4″
    Weight
    Net Weight 34.5kg / 75.9lbs
    Gross Weight 38.9kg / 85.6lbs
    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “Wharfedale Pro DVP-X215 Passive Full Range Speaker”

    Your email address will not be published. Required fields are marked *

    About Delivery
    Once we have received your order, you will be contacted by one of our representatives to discuss more about shipping and delivery methods appropriate to your destination.